Drawing Eyes Tutorials

tutoriales con sencillo paso a paso en la elaboración de los ojos realistas.

Good drawing tutorials can still help you to accelerate your learning process. What you need is step-by-step instructions on how to draw. Take a look at the pupil(the black area in the center), this area contracts in size when light hits it. The area around the pupil is the iris, this is the area that gives us our eye color. As you can see its not just a blotch of brown, its made up highlights and shadows and this is what we will concentrate on.

Adding the right shadows and highlights gives they eye depth and life. All eyes are different and you will see that adding different highlights in different areas gives different effects. The white dot close to the eye is the reflection of light source, it can be big or large, it depends if the person is indoor or outdoor. Another thing you must take into consideration is the shape of the eye. The surface of the eye is not flat, it has a curve to it.

So taking that into consideration when drawing highlights will give the eye much more dimension. These are the tools that you should used:

Tools Used:

2h wood cased pencil

2b 0.5 Mechanical Pencil

Kneaded Eraser

Color Blender

Smooth Bristol Paper

Pencil Eye Tutorial

Step 1

Well we will start by drawing the outline, this can be a fast sketch, but enough detail to show the shape. I used 2b 0.5mm mechanical pencil. Make sure you don’t make the outline too dark or else you will have an outline in the end. The three round circles close to the pupil will be light source reflections.

Step 2

Start by filling in the pupil using the 6b pencil. Make sure not to press too hard or else you will not be able to erase it easily if you need to. One good way to get really darks is to layer it. Start off by lightly going over with with the pencil and then use the the color blender to blend it. Add another layer of pencil with and do the same with blender. Keep on doing this until you are satisfied with it.

Step 3

Take your 4b pencil and put down some graphite on a separate piece of paper. Get it as dark as possible, then with your color blender lightly rub that area. Now if you look at the tip of blender you will see that it has some graphite. Now rub the area around the the wobbly circle. If you don’t a have a color blender you can use a shading stump. I would recommend that you have both of these tools, they can be helpful in achieving different effects.

Step 4

Using your mechanical pencil draw the lines that you see around the area that was shaded previously, try to make them quick and light. If they are random, it would be much better. These lines will serve as a guide of highlights and shadows that the iris has. From the reference picture of the eye above, you can see that the iris is full of highlights and shadows.

Step 5

sing your mechanical pencil lightly fill in the area around the pupil. Then with with the blender blend from the center of the pupil out. This will also pull some darks from the center of the pupil, giving that area some shadows.

Step 6

The area outside of the iris layered under the rest of the iris, adding these shadows gives the iris much more depth. Lightly draw them under and blend them with the rest of the dark area. You don’t have to put shadows all the way around, just on random areas.

Step 7

Using your blender pull from the edge of the inner area outside. This will give a nice pattern and will be a guide for the highlights and shadows on the outer area. Make sure you don’t shade the highlights or else you will lose them. You can always erase those areas after so they wont be as bright.