satellite director 3D


1.2.0 oleh Nancy Cowell
Mar 7, 2017 Versi lama

Tentang satellite director 3D

Dengan program satfinder 3D Anda dapat dengan mudah menyesuaikan parabola Anda

SatFinder derector 3d (Satellite Finder 3D) is a tool which will help you to set up satellite dish. It will give you azimuth, elevation and LNB tilt for your location (based on GPS) and chosen satellite from list. The result is shown both as numeric data and graphical on google maps. It has also built in compass which will help you to find proper satellite azimuth. It also can use augmented reality to show where is satellite on camera view.

Finding a TV satellite or an antenna, in azimuth, can be pretty difficult. Before you can find it with a compass you have to do some calculations using GPS location, magnetic variation, compass azimuth and satellite azimuth.

Satellite Director replaces all of that. See tips to success below.

Compass works only on devices with compass sensor (magnetometer).

How to use this app:

1. First of all, you should enable GPS and Internet on your phone. Remember – in most cases it is impossible to receive GPS signal inside buildings. So if you want to get very accurate location – please go near windows or go even outside.

In current app version location should be found quite immediately. So if you stuck with ‘no location’ message please make ensure that you got enabled all required features/permissions.

2. If app found your location, you must select desired satellite. To do this you must find icon with magnification glass and tap it. On the list you will find all satellites with elevation angle above zero degrees. Remember: satellite name doesn’t affect the calculation of angles. Important thing is satellite 3D position.

3. The azimuth, elevation and skew angle is calculated for your location and chosen satellite. Under calculated values there is a compass with graphical representation of azimuth angle. The azimuth angle is calculated with magnetic inclination. Remember – every time you use compass – you should calibrate it. Green line represents your phone azimuth. So if on compass green and red indicators are on each other – front of the phone should show you direction to the satellite. If the compass value is correct – phone azimuth value will go green.

3 tips to success:

1- do NOT go to close to the iron dish, iron lnb arm or iron pole (keep at least 30 cm distance)

2- calibrate the compass of the phone by waving it in a figure 8 before you start

3- optional: calibrate the compass of the phone by rolling your phone along its length axis about 2-3 turns (works on some phones)

Dish Pointer supports:

INTELSAT, INMARSAT, TIANLIAN, EUTELSAT, AMC, LUCH, COSMOS, OPTUS, APSTAR, SUPERBIRD, BEIDOU, JCSAT, CHINASAT, PALAPA, AFRICASAT-2, ABS, KIKU-8, MTSAT, MBSAT, KIZUNA, SINOSAT, ST, HIMAWARI-6, EXPRESS-AM, N-STAR, VINASAT, ZHONGXING, COMS, , FENGYUN, GARUDA, ASIASAT, THAICOM, TELKOM, INDOSTAR, KOREASAT, N-SAT, BSAT, ASTRA, NSS, SES, ASIASTAR, EXPRESS, INSAT, KODAMA, YAMAL, TDRS, CHINASTAR, KAZSAT, RADUGA, HORIZONS, GSAT, ESIAFI, TELSTAR, ELEKTRO, KALPANA, LEASAT, RADUGA-1M, GALAXY, METEOSAT, BONUM, DIRECTV, DP, SKYNET, YAHSAT, SIRIUS, SYRACUSE, AZERSPACE, AFRICASAT, NIMIQ, THURAYA, NIGCOMSAT, TURKSAT, HELLAS-SAT, AKSAT, NATO, ARABSAT, EUROBIRD, DFH, HYLAS, ORIZONT, XTAR, BADR, AMOS, COMSATBW, RADUGA-1, RASCOM, THOR, MSG, NILESAT, HISPASAT, ECHOSTAR, AMAZONAS, GOES, BRASILSAT, STAR, QUETZSAT, VENESAT, XM, ICO, SPACEWAY, SKYTERRA, LES, AMSC, GSTAR, SATCOM, MSAT, ANIK, SOLIDARIDAD, SATMEX, MEXSAT, HGS, CIEL

Thank you for using the app "Satellite Director / SatFinder 3D"

Informasi APL tambahan

Versi Terbaru

1.2.0

Diunggah oleh

ថាណា កូនម៉ាក់

Perlu Android versi

Android 2.1+

Laporkan

Tandai sebagai hal yang tak patut

Tampilkan Selengkapnya

Use APKPure App

Get satellite director 3D old version APK for Android

Unduh

Use APKPure App

Get satellite director 3D old version APK for Android

Unduh

satellite director 3D Alternatif

Mendapatkan lebih banyak dari Nancy Cowell

Menemukan