Satellite Finder - Sattelite Director

這個程序會幫助你定位你的碟形天線。

SatFinder tool (Satellite Finder), is an application to orient parabolic antennas based on two points, the first sailing of the device and the second position of the satellite, especially for those fans of free to air.

Specific aspects.

-Elevation

-Azimuth

-Skew

-Ability to get the exact point where you are.

-Ability to obtain a large list of satellites

-Ability to change the point where you are to another point in specific, just dragging a marker

Finding a TV satellite or an antenna, in azimuth, can be pretty difficult. Before you can find it with a compass you have to do some calculations using GPS location, magnetic variation, compass azimuth and satellite azimuth.

Satellite Director replaces all of that. See tips to success below.

Português: Telefones sem bússola não pode baixar este aplicativo.

WARNING: YOUR PHONE or TABLET MUST HAVE A COMPASS !!!!

WITHOUT COMPASS YOU CANNOT DOWNLOAD THIS APP.

Check "Satellite Locator" which uses GPS locations to find a satellite.

Some phone/tablet compass are really bad so compare your phone/tablet compass with a real compass !!

Unfortunatly you have to calibrate the compass before using it.

Metal covers/cases or covers/cases with metal/magnetic closure will influence/disrupt the compass of your phone or tablet. Do not use these covers !! The compass of your phone can also get inaccurate because it is affected by other electro - magnetic fields or because it is weakened by age. Calibrating the compass may not help anymore.

PRECISION DEPENDS ON THE QUALITY OF YOUR PHONES HARDWARE.

Warning: If you use Cyanogenmod / Cymod then you may run into Android compatibility issues and the app may not work. You should then complain to Cyanogenmod / Cymod and not to me.

This app is add-free !

Help me to continue the work on this app and watch some of my videos on Youtube. The advertising in the videos provides some required money (houres of work, phones to test on, satellite equipment, etc.).

How does it work ?

Just enable the GPS in your phone or enter your GPS location, select the desired TV satellite or antenna location and point your phone to the sky to target (find) the TV satellite. You have found the satellite when the white ball is in the white circle and the cyan ball is in the cyan circle. Align, in azimuth, the offset arm of the satellite dish to the cyan arrow on the phones display and the satellite dish is aligned in azimuth with the satellite.

Selectable audio tone, camera preview, continuous mode (no pause), color pickers or a user defined satellite position may make it easier for you to find the desired TV satellite. The satellite list contains 280 satellites.

Optional you can take a photo (resized)/screenshot by touching on the director tab. The photo/screenshot is ONLY stored on the phones memory card.

Optional: you can get an indication when you are to close to iron (dish/pole) in the form of an green/yellow/red bar.

Satellite positions are derived from Agi's database. Some positions may seem not accurate (example: Hispasat 30°w is at 29.96°w in the satellite list) but they are very accurate.

SatFinder (Satellite Finder) satellite locator app is a tool which will help you to set up satellite dish. It will give you azimuth, elevation and LNB tilt for your location (based on GPS) and chosen satellite from list. The result is shown both as numeric data and graphical on google maps. It has also built in compass which will help you to find proper satellite azimuth. It also can use augmented reality to show where is satellite on camera view.

Compass works only on devices with compass sensor (magnetometer).

How to use this app:

First of all, you should enable GPS and Internet on your phone. Remember – in most cases it is impossible to receive GPS signal inside buildings. So if you want to get very accurate location – please go near windows or go even outside.

Enjoy it .